daviep
|
| posted on 6/6/10 at 12:27 PM |
|
|
Coil Connectors
I'm thinking about converting to Nippon Denso stick coils like
THESE.
Does anybody know what type of connector these coils use?
Alternatively does anybody have any connectors or part of a loom that they wish to sell at a reasonable price?
Thanks
Davie
|
|
|
|
|
turbodisplay
|
| posted on 6/6/10 at 12:51 PM |
|
|
Just ask the seller if he will include connectors with a bit of loom, most will.
Darren
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Peteff
|
| posted on 6/6/10 at 01:10 PM |
|
|
quote:
Originally posted by turbodisplay
Just ask the seller if he will include connectors with a bit of loom, most will.
Darren
Bike breakers don't usually cut a good loom. You could use some speaker terminals and mastic to seal it. VW Golf V5 uses similar on plug coils.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
turbodisplay
|
| posted on 6/6/10 at 03:43 PM |
|
|
Worth asking though, if the bike has been in a smash the loom may not be 100%.
Darren
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
rgrs
|
| posted on 6/6/10 at 04:59 PM |
|
|
try : http://www.bmotorsports.com/
they may be able to help
Roger
|
|
|
daviep
|
| posted on 7/6/10 at 06:46 PM |
|
|
quote:
Originally posted by rgrs
try : http://www.bmotorsports.com/
they may be able to help
Roger
Thanks
Davie
|
|
|
coozer
|
| posted on 7/6/10 at 09:39 PM |
|
|
Find out the part number and I may be able to get you some including terminals and seals.
1972 V8 Jago
1980 Z750
|
|
|
