neo2
|
| posted on 17/6/10 at 06:33 PM |
|
|
wanted 2.0 pinto pas pump and crank pulley
Hi guys not sure if any of you might have these odd parts kicking about but i need the following..
1, pinto crank pulley (MUST BE DOUBLE DRIVE TWIN V TYPE)
2, Pinto power steering pump and mounting bracket from a sierra etc..
thanks people for reading..
|
|
|
|
|
geoffxt
|
| posted on 18/6/10 at 10:19 AM |
|
|
Hi, I've got a new double pulley for a pinto the o/d is 11.5mm approx. I'm looking for a decent single pulley of same diameter. Can we
arrange a swap? u2 me if able to. I'm going to Newark tomorrow and could deliver if you're going to be there.
|
|
|
neo2
|
| posted on 18/6/10 at 06:58 PM |
|
|
Geof not going to newark sorry mate..
I'm not going to have the single pulley available for a while ethier as its in use still on a road car not kit car...
Would be interested in buying though if you decide to do a straight sale..
What do you mean by 11.5mm od where is that measurement or was it 115mm outside od ??
Rob
|
|
|
geoffxt
|
| posted on 18/6/10 at 07:21 PM |
|
|
Rob, I'm not in any hurry to get rid of the pulley. I did mean as you pointed out 115mm outside diameter. Oh for feet and inches! Get in
touch when you have the single pulley free. That is if the diameter is ok.
|
|
|
