smart51
|
| posted on 29/7/10 at 01:51 PM |
|
|
13mm or half inch coolant hose with a 90° bend in it
I need a length of 1/2" or 13mm coolant hose with a 90° bend at one end and total length about 250mm. The standard kit car way would be to buy
a bend and a straight plus a joiner and 2 hose clips but as it will be on display I want it to look nice. I am happy to cut it out of a larger hose
from a production car but you can't search on eBay unless you know the make and model of car to donate it.
Do any of you fine car tinkerers have or know of a hose that will fit my requirements?
|
|
|
|
|
Miks15
|
| posted on 29/7/10 at 02:16 PM |
|
|
i had a few odd shaped bits come off the BMW when i stripped it, ill have a look for you when i get home if theres anything suitable
|
|
|
l0rd
|
| posted on 29/7/10 at 02:35 PM |
|
|
renault lagunas i believe have something that might be of use. It is used for the water expansion bottle.
If you funcy a drive to the breakers
|
|
|
r1_pete
|
| posted on 29/7/10 at 02:51 PM |
|
|
Will any of these
do you?
|
|
|
smart51
|
| posted on 29/7/10 at 03:03 PM |
|
|
Thanks Miks. If you do have something that would be great.
Thanks Lord. I want it for an expansion bottle too!
quote:
Originally posted by r1_pete
Will any of these
do you?
No, because they're all 100mm long and I need 250. I've already scanned eBay.
|
|
|
Andy D
|
| posted on 29/7/10 at 03:18 PM |
|
|
What about these?
Quick elivery too.. 
|
|
|
02GF74
|
| posted on 29/7/10 at 03:53 PM |
|
|
quote:
Originally posted by smart51
I need a length of 1/2" or 13mm coolant hose with a 90° bend at one end and total length about 250mm.
what exactly you mean by total length?
length of each arm to be 250 mm or length of both arms to be 250 mm?
if the latter,
see here each arm is 150 mm so total length I calculate as 300 mm.
re-read your post - you are after an unequal length arm 90 deg bend - with the longest arm 250 mm? can't help ya there, 150 mm is the best I
found, as above ^^
could trying bending a piece of aluminium tubing or use copper fitting.
[Edited on 29/7/10 by 02GF74]
|
|
|
smart51
|
| posted on 29/7/10 at 04:44 PM |
|
|
Sorry, yes. one arm of 250mm, one need only be 25mm.
|
|
|
