prelude1980
|
| posted on 16/12/10 at 08:05 PM |
|
|
Machined Bushes
I'm after 20 machined bushes for some rose joints before xmas.
Can any one helps?
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
|
|
Talon Motorsport
|
| posted on 16/12/10 at 10:00 PM |
|
|
What material, size , length , thread , pitch?
|
|
|
Confused but excited.
|
| posted on 16/12/10 at 10:04 PM |
|
|
Send a U2U to flak monkey aka David. He does good work.
Tell them about the bent treacle edges!
|
|
|
MikeR
|
| posted on 16/12/10 at 10:55 PM |
|
|
have you looked on ebay at McGill - if its a standard size they probably already do them, if not could you alter your sizes to use the bits they do?
|
|
|
prelude1980
|
| posted on 16/12/10 at 11:54 PM |
|
|
I have a drawing just not sure how to post it.
It's 25mm diameter mild steel 30mm long with m12 hold thru the middle and a step on the outside diameter
|
|
|
Talon Motorsport
|
| posted on 18/12/10 at 07:23 PM |
|
|
£3 each bush from me.
|
|
|
prelude1980
|
| posted on 28/12/10 at 03:58 PM |
|
|
any other suggestions. I emailed Flak before Xmas but no answer. also emailed Talon Motorsport but no reply
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
