tomgregory2000
|
| posted on 1/3/11 at 09:37 PM |
|
|
WTD: Super massive long shot for a bit of hose for my sr20det engine
Hi everybody.
Im on the look out, hunt, hopefull, if all fails ill try nissan
but i need to get my hands on a rocker cover to turbo inlet vent hose for an sr20det engine.
Its number 9 on this link exploded diagram
Has anybody got one kicking about? I know its alot to ask but you never know if you dont ask
|
|
|
|
|
owelly
|
| posted on 1/3/11 at 10:43 PM |
|
|
It doesn't look too complicated so wouldn't a correctly sized piece of silicon 'ose do the job, assuming you have the orifice bung
or know the size of the 'ole?
http://www.ppcmag.co.uk
|
|
|
dave-69isit
|
 posted on 2/3/11 at 12:26 AM |
|
|
breather pipe
its the same on primeres and sirena 2 l models
|
|
|
Davey D
|
| posted on 2/3/11 at 05:58 AM |
|
|
If that is the pipe that breather pipe that goes from the rocker to the inlet pipe after the maf i just blocked mine off at the inlet end, and ran a
new piece of hose from the rocker to a catch tank. It stops any oily vapour from going back into the combustion cycle :-)
|
|
|
