Minicooper
|
| posted on 6/11/11 at 07:30 PM |
|
|
Box Section
Hello,
I need about 225mm of 60*30 box section, around 2.5~3 wall thickness. Obviously will pay for postage and a drink or two. I have hundreds of feet of
various box sections and tube but no 60*30
I'm based in Chandlers Ford, SO53 if anyone can help
Cheers
David
|
|
|
|
|
DavidM
|
| posted on 6/11/11 at 09:02 PM |
|
|
If it is mild steel box section I think you will struggle as 60 x 30 isn't a standard size. 50 x 30 or 60 x 40 are the closest.
David
Proportion is Everything
|
|
|
Minicooper
|
| posted on 6/11/11 at 09:26 PM |
|
|
quote:
Originally posted by DavidM
If it is mild steel box section I think you will struggle as 60 x 30 isn't a standard size. 50 x 30 or 60 x 40 are the closest.
David
That's probably why I haven't got any! 50*30 would be fine if anyone has that
Cheers
David
|
|
|
Minicooper
|
| posted on 7/11/11 at 12:34 PM |
|
|
60*40 would be acceptable as well, or even 60*60
Cheers
David
|
|
|
TAZZMAXX
|
| posted on 7/11/11 at 01:17 PM |
|
|
I have an abundance of 50 x 30 x 3mm and some 60 x 40 x 3mm. What's your preference? U2U me some details and I can get a bit in the post if you
like.
|
|
|
Minicooper
|
| posted on 7/11/11 at 01:39 PM |
|
|
Sent U2U
Cheers
David
|
|
|
Minicooper
|
| posted on 9/11/11 at 04:06 PM |
|
|
Thanks to TAZZMAXX,
Two bits of 50*30 turned up today
Cheers
David
|
|
|
TAZZMAXX
|
| posted on 9/11/11 at 04:30 PM |
|
|
quote:
Originally posted by Minicooper
Thanks to TAZZMAXX,
Two bits of 50*30 turned up today
Cheers
David
Good, that was quick, they weren't sent till yesterday midday. I sent 2 pieces just in case of a taape measure malfunction!
Regards, Gareth
|
|
|
