garybee
|
| posted on 25/2/12 at 09:51 PM |
|
|
Type 9 reverse switch plug
Does anyone have a plug which I can wire into my loom to connect to a Type 9 reverse light switch please? I'm after the type to connect to two
bullet connector.
Thanks in advance
Gary
|
|
|
|
|
AndyW
|
| posted on 25/2/12 at 10:58 PM |
|
|
I just soldered two wires to the switch and then connected them into the loom. Either that or just two bullet connectors the wire into loom. Works
fine that way
|
|
|
garybee
|
| posted on 25/2/12 at 11:18 PM |
|
|
That's a good idea thanks, I'll do that (solder) if nobody has one they want rid of but would rather use a plug if possible.
Ta muchly for the advice 
|
|
|
big-vee-twin
|
| posted on 25/2/12 at 11:26 PM |
|
|
Solder and shrink sleeving works well
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
snapper
|
| posted on 26/2/12 at 08:27 AM |
|
|
Bullets for me as I tend to remove the engine and box a lot
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
