mark chandler
|
| posted on 5/7/14 at 02:47 PM |
|
|
WTD. Oil cooler, what have you got?
I,m after a universal oil cooler to put on my digger, the hydraulic is getting very hot so ideally want something with 1/2" BSP fittings and
some bits of hose so I can cut into the fluid return path.
Beer tokens waiting.
Cheers Mark
|
|
|
|
|
owelly
|
| posted on 5/7/14 at 02:59 PM |
|
|
A oil to air cooler may not help much as there won't be much air flow over it, unless you fit a fan too. Is there room to fit a oil to water
cooler and fit it behind the oil filter? That's assuming it's not an air-cooled engine?!
http://www.ppcmag.co.uk
|
|
|
rodgling
|
| posted on 5/7/14 at 05:50 PM |
|
|
I have a cooler in v good condition (19 row IIRC), can't remember the fitting size but have some suitable hose to go with it. Can dig out
details/photos if you're interested. Say £50 for cooler and hose? If you're doing Bedford on Monday can bring it along.
|
|
|
mark chandler
|
| posted on 5/7/14 at 06:27 PM |
|
|
Air cooled engine, honda clone so no power to run a fan unfortunately 
19 row will not cut it, thanks for the offer.
Thinking outside the box I could weld up an landrover TDI intercooler as these are nice and large, anyone got one of these?
[Edited on 5/7/14 by mark chandler]
|
|
|
