Deckman001
|
| posted on 28/11/04 at 10:31 PM |
|
|
Bolt set
Wanted, a bolt set for joining a x/flow to (Alloy Bellhousing)type 9 box and starter, i have a few of them but really need the full set and the local
bolt supplier doesn't want to help 
Thanks
Jason
|
|
|
|
|
bob
|
| posted on 29/11/04 at 12:38 AM |
|
|
jason
pop in next time your passing i may well have what your looking for in my biscuit tin
|
|
|
David Jenkins
|
| posted on 29/11/04 at 08:37 AM |
|
|
I'm sure that someone like Namrick can sell you the bolts if Bob can't help...
Bolts that screw into the engine block are UNC (can't remember the diameter - I'm in the office) and those that screw into the bellhousing
are metric coarse. The metrics are easy to find, and the UNCs are commonly available from the specialists.
rgds,
David
|
|
|
Deckman001
|
| posted on 29/11/04 at 10:43 AM |
|
|
Cheers chaps, was willing to pay for some really if anyone had a set ready to send as i'm not sure of the sizes ya see, but will try to pop
over to bobs to have a look soon as i can, As i temp put the engine and box together with the starter and got it turning over with a spare battery i
had, so don't want to wait now !! 
Jason
|
|
|
ChrisW
|
| posted on 29/11/04 at 01:28 PM |
|
|
Jason
Orbital Fasteners just up the road from me are spot on for odd nut and bolt requests. If you have one good bolt they can tell you everything you need
to know about it and usually sell you more the same!
Chris
My gaff my rules
|
|
|
James
|
| posted on 29/11/04 at 03:09 PM |
|
|
Jason,
If you still can't find any then:
http://www.ahc-camberley.co.uk
are really good. There's only one thing they haven't be able to supply me so far and I'm not sure it exists!
Cheers,
James
[Edited on 29/11/04 by James]
|
|
|
Deckman001
|
| posted on 29/11/04 at 05:15 PM |
|
|
Just in case anyone has a bolt of each size laying about, can they measure them and let me know as i might be able to get some from a supplier in Brum
i might be visiting on Wed
Thanks
Jason
|
|
|
