locost7-online.com
|
| posted on 15/6/15 at 07:44 PM |
|
|
Cortina calliper retaining bolts
I stripped my uprights today but managed to snap 2 of the calliper retaining bolts, where can I get them from or anyone got any?
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
|
|
nadwgbr
|
| posted on 15/6/15 at 11:01 PM |
|
|
give Tiger kit cars a call...they still use the Cortina uprights and have a spares department....friendly bunch.
|
|
|
steve m
|
| posted on 16/6/15 at 07:36 AM |
|
|
My Cortina upright caliper bolts are just normal 8.8 12mm ones, there not special threads or anything fancy
steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
locost7-online.com
|
| posted on 16/6/15 at 07:39 AM |
|
|
Thanks, that's exactly what I wanted to know,wasn't sure if they were imperial thread
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
Brian R
|
| posted on 16/6/15 at 09:21 AM |
|
|
Yes standard M12 x 1.75 bolts. You need bolts with the plain shank to locate the calipers properly as opposed to set sccrews.
|
|
|
