ian locostzx9rc2
|
| posted on 2/7/16 at 08:36 AM |
|
|
Removable steering wheel boss recommendations
Looking to get a removable steering wheel boss for my hot rod Sierra steering column I don't want a weld on one just one that fits on an
aftermarket boss any recommendations ? Cheers Ian
|
|
|
|
|
matt5964
|
| posted on 2/7/16 at 09:02 AM |
|
|
I use the NRG system as it has zero play and you can get some accessory that allow you to lock off the place when not in use and stow the lock when
driving
http://www.getnrg.com/index.php?route=product/category&path=69_25
http://www.getnrg.com/index.php?route=product/category&path=69_267
http://www.getnrg.com/index.php?route=product/category&path=69_188
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
|
Mash
|
| posted on 2/7/16 at 10:26 AM |
|
|
Sorry to hijack your thread Ian, but......
Not really sure what I'm talking about here, but presumably I would still need to bolt something on to my column first to fit this system ?
Help 
|
|
|
matt5964
|
| posted on 2/7/16 at 11:38 AM |
|
|
Depends on your boss, I had an adapted ring machined up at a local engineering shop.
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
|
ian locostzx9rc2
|
| posted on 2/7/16 at 11:44 AM |
|
|
Aftermarket boss then the snap off boss then bolts onto it I hope !!!
|
|
|
Mash
|
| posted on 2/7/16 at 11:50 AM |
|
|
Where you getting the aftermarket boss from then Ian?
|
|
|
ian locostzx9rc2
|
| posted on 2/7/16 at 12:17 PM |
|
|
Not sure yet are the sparco quick release bosses any good ?
[Edited on 2/7/16 by ian locostzx9rc2]
|
|
|
furryeggs
|
| posted on 2/7/16 at 03:49 PM |
|
|
I've used a ford fig boss ftom CBS with a RMD steering wheel on an adjustable column, so once iva is done and passed my sparco quick release
will be fitted and column adjusted backwards to get back the added length of the quick release.
|
|
|
