danb81
|
| posted on 8/2/17 at 12:43 AM |
|
|
OZ ford aluminium spigot rings
Looking for a set of original OZ aluminium spigot rings
68mm outside diameter and internal 63.4mm
Thanks in advance
|
|
|
|
|
matt5964
|
| posted on 8/2/17 at 06:53 AM |
|
|
eBay second item that comes up
number
112270469853
BIN £9.5
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
|
danb81
|
| posted on 8/2/17 at 07:23 AM |
|
|
Cheers but they are not the original Aluminium items as required
|
|
|
40inches
|
| posted on 8/2/17 at 09:14 AM |
|
|
Any size you want, in ally, steel or plastic from here
|
|
|
matt5964
|
| posted on 8/2/17 at 10:02 AM |
|
|
quote:
Originally posted by danb81
Cheers but they are not the original Aluminium items as required
What is the difference between the originals?
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
|
danb81
|
| posted on 8/2/17 at 10:33 AM |
|
|
quote:
Originally posted by matt5964
What is the difference between the originals?
The original OZ items are made from aluminium not plastic.
Plastic versions are known to melt with heavy track use, this is why I'm avoiding them.
|
|
|
danb81
|
| posted on 8/2/17 at 10:39 AM |
|
|
quote:
Originally posted by 40inches
Any size you want, in ally, steel or plastic from here
Yes planned to use those as my last resort if I can't get any. The originals also seem to have a loose fitment ring around the spigot though,
seems specific to OZ wheels.
|
|
|
matt5964
|
| posted on 8/2/17 at 10:48 AM |
|
|
quote:
Originally posted by danb81
quote:
Originally posted by matt5964
What is the difference between the originals?
The original OZ items are made from aluminium not plastic.
Plastic versions are known to melt with heavy track use, this is why I'm avoiding them.
Thanks
will measur my new wheels up as not thought of that. Just got a set of super laggeras 15" and I'm on sierra hubs
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
|
loggyboy
|
| posted on 8/2/17 at 10:52 AM |
|
|
quote:
Originally posted by danb81
The original OZ items are made from aluminium not plastic.
Plastic versions are known to melt with heavy track use, this is why I'm avoiding them.
Are you doing endurance racing?!
I have plastics on my track car and despite getting some very impressive temps in to the brakes, the spigots are in same condition to this day.
And they were £4 (for 4) ebay jobs.
[Edited on 8-2-17 by loggyboy]
[Edited on 8-2-17 by loggyboy]
Mistral Motorsport
|
|
|
nick205
|
| posted on 8/2/17 at 12:40 PM |
|
|
Just curious
The dimensions you give sound like trying to fit Peugeot fitment wheels to Ford hubs?
|
|
|
loggyboy
|
| posted on 8/2/17 at 12:52 PM |
|
|
quote:
Originally posted by nick205
Just curious
The dimensions you give sound like trying to fit Peugeot fitment wheels to Ford hubs?
Good point, IIRC alot of aftermarket rims come with ~73mm centrebore. Your rims dont have spiggots already that have 'merged' in to the
wheels so not obvious? ( might make it easier to find what your after if that is the case.)
Mistral Motorsport
|
|
|
danb81
|
| posted on 8/2/17 at 12:58 PM |
|
|
quote:
Originally posted by matt5964
Thanks
will measur my new wheels up as not thought of that. Just got a set of super laggeras 15" and I'm on sierra hubs
I have the very same wheels. I'm sure you have noticed as I have that the wheel hub wall around the spigot area unlike most wheels is rather
thin due to weight saving. This area normally acting as a heat sink and keeping temps away from the spigot.
Loggyboy I generally use plastic spigots with other wheels but after reading of others experiences I'm sticking with what they originally came
with.
Sprint's, but long periods during trackdays are the concern.
|
|
|
danb81
|
| posted on 8/2/17 at 05:31 PM |
|
|
quote:
Originally posted by nick205
Just curious
The dimensions you give sound like trying to fit Peugeot fitment wheels to Ford hubs?
Peugeot are 65,1 mm
OZ use both 68 and 75 center bores on their wheels
|
|
|
nick205
|
| posted on 9/2/17 at 09:46 AM |
|
|
quote:
Originally posted by danb81
quote:
Originally posted by nick205
Just curious
The dimensions you give sound like trying to fit Peugeot fitment wheels to Ford hubs?
Peugeot are 65,1 mm
OZ use both 68 and 75 center bores on their wheels
OK - I'll keep out of this one then!
|
|
|
chillis
|
| posted on 9/2/17 at 12:51 PM |
|
|
Why can you not get them from OZ?
Never under estimate the ingenuity of an idiot!
|
|
|
