BigDawgV8
|
| posted on 5/9/20 at 04:40 PM |
|
|
Zetec RWD Conversion Parts
Hi All,
I’m on the look out for the parts required to convert a 2.0 litre Zetec engine to rear wheel drive.
Sierra CVH sump and oil pick-up, 1.8 Zetec flywheel, LRS707 starter motor etc...
Does anyone have anything in good, used condition or recommend any suppliers to buy new?
Thanks for the help,
|
|
|
|
|
starterman
|
| posted on 5/9/20 at 06:14 PM |
|
|
LRS707 about £56 all in delivered.
Cheers
Mike
|
|
|
wowblaauw
|
| posted on 5/9/20 at 08:08 PM |
|
|
Hi,
I have a Tiger ERA Zetec sump with windage tray and oil pickup - complete shortened sump.
I also ha e a spare zetec 2.0l flywheel.
Cheers
Craig
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in
sideways, chocolate in one hand, wine in the other, body thoroughly used up, totally worn out and screaming...
Damn, What a ride!!"
|
|
|
BigDawgV8
|
| posted on 6/9/20 at 10:14 AM |
|
|
Hi guys,
Question for all, Can I run the standard 2.0 flywheel in rear wheel drive configuration or do I definitely need to change it for the 1.8?
|
|
|
wowblaauw
|
| posted on 6/9/20 at 12:46 PM |
|
|
My understanding is you can run either - people use the 1.8 as it is marginally lighter.
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in
sideways, chocolate in one hand, wine in the other, body thoroughly used up, totally worn out and screaming...
Damn, What a ride!!"
|
|
|
BigDawgV8
|
| posted on 6/9/20 at 02:09 PM |
|
|
Wowblaauw you have U2U!
|
|
|
big_wasa
|
| posted on 6/9/20 at 03:51 PM |
|
|
I run 2.0 flywheels as they handle more torque but with an Mt75 not a T9.
I’ve also bought a couple of bits from Craig. 100% thumbs up. 
|
|
|
