907
|
| posted on 11/9/20 at 10:50 AM |
|
|
Offcut (300mm) of 3" schedule 160 steel pipe please.
Hi All.
I've been asked to make a release spanner/clamp for a fifties 2CV.
I've measured the spring thats got to be unwound off the bush so looking fro a piece of thick wall pipe that's 66. 64 i/d.
Thanks in anticipation,
Paul G
p.s. Don't expect this for nothing, or even beer money.
An arm and a leg will be closer.
[Edited on 11/9/20 by 907]
|
|
|
|
|
nick205
|
| posted on 11/9/20 at 03:25 PM |
|
|
Can't help with the pipe.
I don't know 2CVs all that well, but is this the suspension spring by any chance?
|
|
|
Schrodinger
|
| posted on 11/9/20 at 08:01 PM |
|
|
Just found this on ebay if it helps.
https://www.ebay.co.uk/itm/MILD-STEEL-ERW-ROUND-TUBE-600mm-to-1190-LENGTHS-34-DIFFERENT-SIZES-10mm-76-1mm/152397405225?var=451784638349&_trkparms=
ispr%3D1&hash=item237b97dc29:g:aZgAAOSwNRdX9lcu&amdata=enc%3AAQAFAAACYBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkxGz2ccqatkEnoeekHqhLk
U4nhe5owpbiiJV2ecIOOmO5MkHmmYzmwoGJAkQwD39bm0d2GeT2myDg9MKYfNrMY%252FBLaLLx7VYvZMLliiMTj1fAk19%252FYokfbI3a9FJn4aqHEcU9lKQGd0NijF%252BmQFO5v6v2N9%252F
8XCVdi71uMcKdWbWDuOP9mXNfSZ2%252BGAzo8criIbZnqwl%252FJhLxgnmAj10C9Qax34b81jjHfgA%252BszPfvhGUTUNlDX3oBnL2vkXg37I4cjqCkwRY0%252F9GByULKIsbU%252BwNBcJrh
GB3p7yJXJ9ugcAiHgWWcy3T5PD5mc%252BiT0WKimdY3eu%252FsbSG2P%252BD8%252FGM0WICJchi7hXW3866mfhhz1%252FpoeKK1vXLZU7UutUT%252Bvd2I4jz6VEKFjfTb%252Fhs8Rd6Fj6
4%252F%252FwV53rj%252FyqkowUbjSlUzRmJ4leyN%252BFptLo2XAvUC%252BwoAhG1juSZe6x0BblzVH0%252Bm51xwlMKD1JLsErcnFtSCJKj5XLXrmuWKlHVHZGAwIKIA40antodGLcNbuNoc
AOwKua26%252B2VAGg3icJLHW7nE3FVg1VOxCvZlyasQABhCTMByyih2sogT%252FVuRugdt72Lct8vm1volpv0vdZ0XORugAaPJ8vqeM%252BV5soO8u5vnnTMDQxOOOqKUMD4is9cqjnJXFOxiZH
jOJGaVF3WWxZ%252BwZ2oHtZAelygQ%252BATVz%252FP62amNDuaa35zfD0OFHPI4m%252BE%252BTNOqREHaB57AMynAG2GsE5ztlWUPkSuD4e121TB%7Ccksum%3A15239740522593c7d6cc4a
dd4b449afd11a700e95a4a%7Campid%3APL_CLK%7Cclp%3A2334524
Keith
Aviemore
|
|
|
907
|
| posted on 13/9/20 at 12:48 PM |
|
|
Nothing quite big enough there Keith. 3" nb pipe is 3-1/2inch o/d and is made that size so that it can be threaded 3"BSP.
Its dimensions in metric are O/D 88.9 ____ I/D 66.64 ____ Wall thickness 11.13
Now we no longer make anything in this country its getting harder to find the materials.
Thanks all the same.
Paul G
|
|
|
nick205
|
| posted on 14/9/20 at 09:07 AM |
|
|
I'm also (guessing) it's one of thos situations where you can buy a tool for the job, but it's expensive for a job you'll
probably do once?
Can the person borrow a tool from an owners club or another owner similar?
|
|
|
steve m
|
| posted on 14/9/20 at 09:23 AM |
|
|
Does it have to be round tube ??
as what about a suitable RHS square tube, but with colletts/very large washers either to bring back to a round end ?
steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
907
|
| posted on 18/9/20 at 12:44 AM |
|
|
quote:
Originally posted by 907
Nothing quite big enough there Keith. 3" nb pipe is 3-1/2inch o/d and is made that size so that it can be threaded 3"BSP.
Its dimensions in metric are O/D 88.9 ____ I/D 66.64 ____ Wall thickness 11.13
Now we no longer make anything in this country its getting harder to find the materials.
Thanks all the same.
Paul G
My eager beagle customer has sniffed some out in the Midlands. 91.2 0/d x 67 id (12.1mm wall) £130 delivered for 500mm.
I know that sounds expensive but the cars a rare model worth several £k and hasn't been driven for two years.
A couple of hire outs may get some cash back. Must be other cars in Europe in need of bushes.
Cheers
Paul G
|
|
|
indykid
|
| posted on 18/9/20 at 01:33 PM |
|
|
It sounds like your customer is absorbing the cost of the design decisions, but why does this tool need to be so stout?
What does it do?
At that price for the pipe, I'd be buying bar and boring it out!
|
|
|
907
|
| posted on 18/9/20 at 04:40 PM |
|
|
quote:
Originally posted by indykid
It sounds like your customer is absorbing the cost of the design decisions, but why does this tool need to be so stout?
What does it do?
At that price for the pipe, I'd be buying bar and boring it out!
Sorry. I've just tried to upload a picture but it wouldn't play the game.
Paul G
|
|
|
steve m
|
| posted on 18/9/20 at 05:38 PM |
|
|
Having looked at what you are trying to work on, all i can say is what an unusual design of shock absorbers/springs
and coupled together like they are,
I dont think ive seen anything quite like it before
steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
SteveWalker
|
| posted on 19/9/20 at 12:44 AM |
|
|
Citroen are known for their weird, often complex, systems. At least the 2 CV system is simple!
|
|
|
