CRAIGR
|
| posted on 16/5/21 at 02:32 PM |
|
|
Type 9 gearbox spacer
Wanted type 9 to bellhousing gearbox spacer . Believe they are 16mm .
Any gathering dust anywhere chaps
|
|
|
|
|
snapper
|
| posted on 16/5/21 at 03:30 PM |
|
|
30mm RetroFord do one
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
big_wasa
|
| posted on 16/5/21 at 04:51 PM |
|
|
Is the v6 first motion shaft really 30mm longer ?
|
|
|
CRAIGR
|
| posted on 16/5/21 at 07:16 PM |
|
|
This box already has a 30mm spacer and has had shaft cut to length of standard box . The trouble with that is shaft now only sits 5mm into spigot
bearing . I could get the 30mm spacer milled down to 15mm but thought I’d ask first .
[Edited on 16/5/21 by CRAIGR]
|
|
|
pmc_3
|
| posted on 17/5/21 at 07:55 AM |
|
|
It might be a silly question Craig but if the shaft has been cut down to the length of a standard type 9, why does it need a spacer at all?
|
|
|
rusty nuts
|
| posted on 17/5/21 at 09:10 AM |
|
|
quote:
Originally posted by pmc_3
It might be a silly question Craig but if the shaft has been cut down to the length of a standard type 9, why does it need a spacer at all?
At a guess ,using a 4 cylinder bell housing on a v6 box?
|
|
|
snapper
|
| posted on 17/5/21 at 10:53 AM |
|
|
quote:
Originally posted by big_wasa
Is the v6 first motion shaft really 30mm longer ?
32mm actually
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
CRAIGR
|
| posted on 17/5/21 at 02:36 PM |
|
|
Correct Rusty
With a 15mm spacer and the input shaft having been cut down it would be the same as a 4cyl type 9 . With the 30mm spacer the end of the input shaft
will only sit in spigot about 4-5 mm including chamfer on shaft . quote:
Originally posted by rusty nuts
quote:
Originally posted by pmc_3
It might be a silly question Craig but if the shaft has been cut down to the length of a standard type 9, why does it need a spacer at all?
At a guess ,using a 4 cylinder bell housing on a v6 box?
|
|
|
.jpg)
