Avoneer
|
| posted on 4/2/05 at 12:00 AM |
|
|
Sierra caliper pistons
Anyone got a pair of these lying around or is it ok to machine the very front rim flat as it a little eroded - the shiny part of the piston is
fine.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
|
|
britishtrident
|
| posted on 4/2/05 at 09:24 AM |
|
|
As a rule unless it is totally knackered it will be OK as it as it is.
If it has any really bad lumps on it due to being forceback with unsuitable tools just dress of the worst with a flat file.
[Edited on 4/2/05 by britishtrident]
|
|
|
ChrisW
|
| posted on 4/2/05 at 12:22 PM |
|
|
I've got a pair of XR4x4 calipers going spare. Straight swap onto any Sierra upright for instant brake upgrade. Only catch is you need
14" (or bigger) wheels to clear the carrier.
Chris
|
|
|
V8Dave
|
| posted on 6/2/05 at 01:59 PM |
|
|
Calipers
If there rears I have 2 @£25 the pair incl postage and can let you have all new seals etc included. U2U me if you want them
I'm based in N wiltshire
|
|
|
%20(WinCE).JPG)
