Lotusmark2
|
| posted on 27/2/05 at 08:14 AM |
|
|
mini shafts/hubs and brakes
Hi
I am after the following
4 x 8.4" disc setup hubs uprights calipers etc.
2 x mini drive shafts
Dont mind refurbing if the price is right.
Please keep your eyes pealed chaps and chapesses
|
|
|
|
|
phelpsa
|
| posted on 27/2/05 at 08:59 AM |
|
|
Have you tried the mini forums Mark??
Adam
|
|
|
Lotusmark2
|
| posted on 27/2/05 at 09:02 AM |
|
|
yep had a good ask around on them but most of them ask silly money for rusty rubbish.
Dont mind doing some work on the bits but the sort of money they think they are worth
I'm in no rush for them but just thought I would see if I can help someone clear out their garage
[Edited on 27/2/05 by Lotusmark2]
|
|
|
phelpsa
|
| posted on 27/2/05 at 09:04 AM |
|
|
I suppose it's because a lot of people transfer them onto older minis.
|
|
|
Lotusmark2
|
| posted on 27/2/05 at 09:05 AM |
|
|
yeah, I think so.
If push comes to shove when I really need them I will pick up a whole mini for about £100 and strip it but we shall see how things go.
[Edited on 27/2/05 by Lotusmark2]
|
|
|
Deckman001
|
| posted on 27/2/05 at 09:49 AM |
|
|
Try sending a U2U to Donut, he's just rebuilt a mini and got alot of his new parts from a friend of his 'mini dave'
Hope it helps
Jason
|
|
|
andyps
|
| posted on 27/2/05 at 10:05 PM |
|
|
Could you use Metro bits - probably cheaper, and very similar with the advantage of vented discs.
Take it you want the shafts with inboard CV joints if you are after 8.4 inch discs.
Andy
An expert is someone who knows more and more about less and less
|
|
|
Lotusmark2
|
| posted on 28/2/05 at 07:15 AM |
|
|
Hi yep after the whole drive train.
Metro stuff would be ok as long as it is from the A series engine and not the K series.
Cheers
Mark
|
|
|
