scutter
|
| posted on 24/11/05 at 01:32 AM |
|
|
4AGE intake gasket drawing
Does anyone have a drawing for a Toyota 4AGE intake manifold gasket, described as valve gasket in the picture below, as i need one to send to the
lazer cutters and i don't have a scanner.
If anyone can help that would be great, also could you put a scale alongside if you have one.
Many thanks Dan.
[img][/img]
|
|
|
|
|
rusty
|
| posted on 24/11/05 at 12:39 PM |
|
|
I have a spare gasket that is not required would this help you out.
|
|
|
Ben Smith
|
| posted on 24/11/05 at 12:49 PM |
|
|
Just make sure you send them the correct one. Don't know if you need wide port or narrow port?
Ben
|
|
|
scutter
|
| posted on 24/11/05 at 03:39 PM |
|
|
I've a early wide port head. The old gasket is about some where but i was hoping just to do the deal over the internet.
Dan.
|
|
|
rusty
|
| posted on 24/11/05 at 04:45 PM |
|
|
I do not require any cash will post it at work for free just send your address and I will send it.
|
|
|
scutter
|
| posted on 24/11/05 at 05:20 PM |
|
|
Rusty U2U sent
Dan
|
|
|
blockhead_rich
|
| posted on 24/11/05 at 09:21 PM |
|
|
I can let you have a drawing but my CAD man is away for the next week.
Rich
|
|
|
albertz
|
| posted on 7/12/05 at 08:28 AM |
|
|
Did anyone ever come up with a drawing for this? I am particularly interested in the positions of the mounting holes on the flange. Not bothered if
TVIS or not, as the mounting holes are the same.
I am getting a flange cut on a water jet and need to give him a CAD drawing. I have measured and drawn up the ports, but the mounting holes are
randomly spaced and positioned. So if anyone has something i would be delighted to hear from them.
Thanks
|
|
|
