Steve Lovelock
|
| posted on 24/1/06 at 10:23 PM |
|
|
Escort rack clamps needed
Hi,
I need a set of escort steering rack clamps, anyone?
Steve
|
|
|
|
|
muzchap
|
| posted on 24/1/06 at 10:34 PM |
|
|
Hey - GTS Tuning do some great Ally ones... for about £30 delivered.
Click Here
A pic of them on my build can be found: HERE
HTH
Murray
|
|
|
gary gsx
|
| posted on 24/1/06 at 10:34 PM |
|
|
Rallyspares or GTS do alloy ones  someone will be along to do a link soon if not GTS is at the top in links 
see beat me to it
[Edited on 24/1/06 by gary gsx]
|
|
|
ch1ll1
|
| posted on 25/1/06 at 08:14 AM |
|
|
ford still do the rubbers and the big clamp
but no longer do the small one
tried ordering some yesterday !
|
|
|
02GF74
|
| posted on 25/1/06 at 08:54 AM |
|
|
someone will correct me if I am wrong but I cannot see why you cannot bend a piece of steel, U shape and drill 2 holes?
Ok, the lamops have a riased edge but will still wortk without that surely?
|
|
|
Locost?
|
| posted on 25/1/06 at 02:30 PM |
|
|
I am not sure, but are the clamps (and rubbers) the same as used on the later capris?
|
|
|
ChrisW
|
| posted on 25/1/06 at 02:54 PM |
|
|
I think it was the early Capri, but yeah, they are certainly the same.
Try www.speedshack.co.uk (ring them though, don't email). That's where I got mine.
Chris
|
|
|
Steve Lovelock
|
| posted on 28/1/06 at 07:04 AM |
|
|
Thanks for the advice, I will try www.speedshack.co.uk to see if they have any second hand. I didn't want to spend £30 for a pair, I'm
not the bank of England so need to be careful where I can be. I'm also tempted to make a pair, the 2B I built used U clamps and they worked
just fine which also tempts me.
|
|
|
