Chris_G
|
| posted on 3/2/06 at 11:58 AM |
|
|
A couple of Zetec connectors...
I'm in need of a couple of connectors for my Zetec upgrade:
1. Crank position sensor (I think this is the same type of connector as the injectors?)
2. Coil pack connector - the small one that plugs into the side of the coil pack, I think its a 3 way?
Anyone got an old loom or doner they could raid for me?
Cheers
Chris
Now finished! Xflow-Zetec swap with GSXR TB's and Megasquirt.
|
|
|
|
|
Ketchup
|
| posted on 3/2/06 at 01:08 PM |
|
|
i got an old audi 80 i am gonna bin, i will have a look later and see if its got some that may fit
|
|
|
BKLOCO
|
| posted on 3/2/06 at 02:06 PM |
|
|
I'm after a crank pos sensor plug as well.
Also TPS plug and FIdle solenoid plug.
If you get offered more than one, gissa shout.
Experience is what you get when you don't get what you want!!! 
|
|
|
Dusty
|
| posted on 3/2/06 at 03:15 PM |
|
|
I have spare injector plugs which fit crank sensor and idle solenoid and a spare TPS plug, all with 6" of wire on. u2u me if helpfull.
(with address)
[Edited on 3/2/06 by Dusty]
|
|
|
Chris_G
|
| posted on 3/2/06 at 03:47 PM |
|
|
Dusty, U2U sent.
Thanks,
Chris
Now finished! Xflow-Zetec swap with GSXR TB's and Megasquirt.
|
|
|
big_wasa
|
| posted on 3/2/06 at 03:47 PM |
|
|
Your lucky day then chaps
Every c**nts wanted a piece of my ass this weeks so I had a day of and went for a wonder around the locall scrapie today.
I have got (I think)
2 x injector harness with cold start con/ tps con/coil con/ water temp con/ vr con.
1 x edis4 with con/ coil with con/ vr sensor with con.
1 x edis4.
 regards warren
|
|
|
Chris_G
|
| posted on 3/2/06 at 04:05 PM |
|
|
quote:
Originally posted by big_wasa
Your lucky day then chaps
Every c**nts wanted a piece of my ass this weeks so I had a day of and went for a wonder around the locall scrapie today.
I have got (I think)
2 x injector harness with cold start con/ tps con/coil con/ water temp con/ vr con.
1 x edis4 with con/ coil with con/ vr sensor with con.
1 x edis4.
regards warren
Can I have the coil pack connector? Please, Please, Please
Chris
Now finished! Xflow-Zetec swap with GSXR TB's and Megasquirt.
|
|
|
big_wasa
|
| posted on 3/2/06 at 10:02 PM |
|
|
Yep ive got 1 spare u2 me your name and address and ill stick it in a jiffy bag on Monday.
regards warren
|
|
|
Chris_G
|
| posted on 3/2/06 at 10:12 PM |
|
|
U2U Sent
Now finished! Xflow-Zetec swap with GSXR TB's and Megasquirt.
|
|
|
.jpg)
