darrens
|
| posted on 4/4/06 at 06:18 PM |
|
|
Granada 7.5" Diff Long Bolt
As above, need the long bolt for the 7.5" diffs, anyone got one going spare.
Cheers
|
|
|
|
|
ned
|
| posted on 4/4/06 at 06:20 PM |
|
|
i believe you can use studding as an alternative - available from any DIY store.
Ned.
beware, I've got yellow skin
|
|
|
bob
|
| posted on 4/4/06 at 07:19 PM |
|
|
DIY store studding probably wont be high tensile, in fact probably not even preper thread but moulded rubbish.
|
|
|
bob
|
| posted on 4/4/06 at 07:21 PM |
|
|
If its the top of the diff bolt i used two M12 hex head bolts and fed them through from the inside.
|
|
|
Kissy
|
| posted on 4/4/06 at 08:59 PM |
|
|
I got one. FoC + Post.
|
|
|
amalyos
|
| posted on 4/4/06 at 09:47 PM |
|
|
Screwfix do Stainless Studding. Thats what I've used.
|
|
|
nludkin
|
| posted on 5/4/06 at 08:09 AM |
|
|
I second bob with the 2 M12 bolts approach. It works a treat, although a tiny bit of metal needs grinding off of the nut that fits inside the diff
casting.
|
|
|
ned
|
| posted on 5/4/06 at 08:25 AM |
|
|
using capheads from the centre pointing outwards should required no grinding i'd of thought surely?!
beware, I've got yellow skin
|
|
|
bob
|
| posted on 5/4/06 at 08:36 AM |
|
|
Yup cap heads no grinding 
Bolts maybe a tad
|
|
|
