big_wasa
|
| posted on 2/6/06 at 08:06 PM |
|
|
Wanted, Sierra bit.
Im after a dizzy rotor drive for a sierra 1.8cvh. bit like hens teeth 
Been to the locall scrapie today. The only one there with a cvh has the same bit as mine buggered
I can not find another car in the ford range that has one.
Please......
|
|
|
|
|
fesycresy
|
| posted on 2/6/06 at 08:09 PM |
|
|
I think I still have a complete 1800 CVH behind the shed.
Busy tomorrow, but I'll have a look Sunday, if I'm feeling brave enough to go adventuring.
U2U Sunday to remind me.
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
graememk
|
| posted on 2/6/06 at 08:10 PM |
|
|
hiya wasa have you tried that weirdo up near my house, mate he's got 50+ sierras there, surly he must have one no doubt he'll charge you
its weight in gold though.
|
|
|
big_wasa
|
| posted on 2/6/06 at 08:28 PM |
|
|
Yeh and golds over £4/gram at the min 
|
|
|
tom_loughlin
|
| posted on 2/6/06 at 08:28 PM |
|
|
Eh? what is it your after? im confused 
i still have my cvh (well, bits of it left) if you want, you can have anything off it for postage cost.
Tom
|
|
|
big_wasa
|
| posted on 2/6/06 at 09:08 PM |
|
|
Tom , The distributor rotor shaft that is bolted to the camshaft sprocket. It has two plastic holding clips that hold the rotor on and I managed to
brake both of by brushing past it..Doh.. I was going to take it of for safe keeping but didnt think it was in the way.
|
|
|
.jpg){kind=avatar}
