ADD
|
| posted on 4/7/06 at 01:30 PM |
|
|
Type 9 to fit V6
Hi all,
I am on the hunt for a type 9 box with long input shaft and V6 bellhousing.
Im in Norwich so would be handy if was reasonably local.
Beer tokens waiting (If not I will have to drink them)
Cheers
Adam
|
|
|
|
|
ned
|
| posted on 4/7/06 at 01:34 PM |
|
|
good luck drinking the beer tokens 
ps is kent too far?
ebay
[Edited on 4/7/06 by ned]
beware, I've got yellow skin
|
|
|
Mr G
|
| posted on 4/7/06 at 03:34 PM |
|
|
As a last resort if you can't get a standard one you can whip the tail section off a v6 type 9 4x4 box and replace it with a 2.0l item to create
a v6 2wd type 9 box. Bellhousing is alloy too, although you then need starter to match.
sorry could'nt be of furthur help
Cheers
G
Normal is getting dressed in clothes that you buy for work and driving through traffic in a
car that you are still paying for - in order to get to the job you need to pay for the clothes
and the car, and the house you leave vacant all day so you can afford to live in it.
|
|
|
chriscook
|
| posted on 4/7/06 at 04:38 PM |
|
|
I've got a bellhousing and release arm if you want it. I sent the box to BGH and its going in the car in the next week or so and so you
can't have that 
|
|
|
rocket
|
| posted on 6/8/06 at 10:39 AM |
|
|
type 9
I have type 9 that came off a 2l.
d reg
Rgds
roger
|
|
|
