rayward
|
| posted on 4/7/06 at 01:33 PM |
|
|
roll tip exhaust pipe
anybody know where i can get one??, just the end to weld on to the silencer to keep mr SVA happy.
cheers
Ray
|
|
|
|
|
jambojeef
|
| posted on 4/7/06 at 02:15 PM |
|
|
I have a 2" inwardly rolled polished stainless sleeve off my old bike can if thats any good?
Geoff
|
|
|
marc n
|
| posted on 4/7/06 at 02:19 PM |
|
|
yep we do them 2 inch id cant remember for the life of me the price best email chrismnrltd@btinternet.com for a price from us if you want one
best regards
marc
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
John Bonnett
|
| posted on 4/7/06 at 06:17 PM |
|
|
I've just had an exhaust system made by PowerCraft Automotive in Paignton. the tailpipe has a rolled end and i am sure they would supply you
with one if you rang them.
Tel 01803 663346 web www.powercraftengineering.com
Hope this is of help.
Cheers
John
|
|
|
jamesbond007ltk
|
| posted on 4/7/06 at 07:35 PM |
|
|
On the topic of exhaust tips...
At present my tip is just a cut end, similar to what prod cars have. Anyway, I know that we are subject to many different things to road cars. But my
tailpipe is tucked well under the rear wing. So will this be ok for SVA. i,e. is the radius tested using the 100mm sphere trick or is it something
else?
|
|
|
Andy W
|
| posted on 4/7/06 at 09:03 PM |
|
|
What o/d tube are you looking for Ray
Andy
|
|
|
omega 24 v6
|
| posted on 4/7/06 at 10:01 PM |
|
|
What about a ring from a ship chandler (yachts) welded round the end of the pipe and flush ground. Would it pass sva?? perhaps this is a viable
alternative.
|
|
|
rayward
|
| posted on 6/7/06 at 02:16 PM |
|
|
thanks for the suggestions, andy W have u2u'd you details.
cheers
Ray
|
|
|
