Krismc
|
| posted on 17/7/06 at 06:38 AM |
|
|
RUBBER HOSE
I need some for my throttle boddies/manifold pretty soon as possible and ive been quoted a few weeks for it, as it needs to be fluorolined and only
purchased in 1 meter lenghts can any body help!
I need 4 x 25mm x 47mm(id) and 4 x 25mm x 54mm(id) roughly.
cheers now
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
|
|
Danozeman
|
| posted on 17/7/06 at 08:51 AM |
|
|
A few weeks?? Do u want a different colour to blue?? Most places keep blue silicon in stock..
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
stevebubs
|
| posted on 17/7/06 at 04:20 PM |
|
|
I used fuel filler hose - available off the shelf....
|
|
|
stevebubs
|
| posted on 17/7/06 at 04:21 PM |
|
|
Try in this order:
Think Auto
Merlin
Autocross
Rally Design
|
|
|
Krismc
|
| posted on 17/7/06 at 05:15 PM |
|
|
NO
.....No
.....No
and no
darn!!!
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Krismc
|
| posted on 17/7/06 at 05:17 PM |
|
|
just rang silicon hoses.com and they are going to cut down 2 45 degree elbows(one 54 and other 48ID) into 4 bits each so i can use them as couplers
so £13 each and £3 delivery!
they dont change for the cutting and it saves me buying 1meter lenghts, cheers
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
