darrens
|
| posted on 17/7/06 at 10:14 PM |
|
|
rover V8 Injection Stepper Motor Air Bypass Valve
As above, more commonly known as the Air Bypass Valve.
Cheers
|
|
|
|
|
mark chandler
|
| posted on 18/7/06 at 06:53 AM |
|
|
hot wire or flappy box, I have a flappy one you are welcome to.
Regards Mark
|
|
|
Agriv8
|
| posted on 18/7/06 at 06:53 AM |
|
|
Darren,
Hotwire of flapper ?
Regards
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
darrens
|
| posted on 18/7/06 at 06:16 PM |
|
|
Hotwire type I believe, it is the attached if that helps (although photo is crap)
Cheers
 
Rescued attachment 12-07-06_2220#1.JPG
|
|
|
mark chandler
|
| posted on 18/7/06 at 09:21 PM |
|
|
hot wire, have you tried thinners to clean it and WD40 to lubricate ?
Rgds Mark
|
|
|
Agriv8
|
| posted on 19/7/06 at 06:59 AM |
|
|
darren does it move at all make any buzzing noises.
mine is the same hotwire system and at switch off it always gives a buzz and a click - I belive this is normal.
Mine seems to work as even with a very lumpy cam tickover is maintained
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
darrens
|
| posted on 21/7/06 at 11:14 PM |
|
|
does bugger all, always in the fully re-tracted position i.e letting air in all the time.
Tried the old wd40 thing o no avail, then accidentally shut th boot on it and cracked it. Now it definitely doesn't do anything.
Cheers
|
|
|
