DIY Si
|
| posted on 6/8/06 at 08:41 PM |
|
|
Yup, '03 busa rated at 175 bhp@9800 (probably at the crank) and 102 lb fts@7000.
|
|
|
|
|
iiyama
|
| posted on 6/8/06 at 08:45 PM |
|
|
Phew!!! 
|
|
|
DIY Si
|
| posted on 6/8/06 at 08:53 PM |
|
|
I had the same issue with mine. The haynes rates it a mere 144.6@9321 but I know it has 164@10,000! Which is a much nicer figure. Same goes for
torque, haynes say 85 lbfts@7213, I've found it rated at 91.5 lbfts @7250. And remeber that you'll probably have a free(er) flowing
exhaust and airfilter than standard so should have even more power than that!
|
|
|
iiyama
|
| posted on 7/8/06 at 04:17 PM |
|
|
Would like to try and get around 200 out of it for the moment. Not partuclarly interested in going forced induction as I feel this may make it a
little more fragile. Oh and the cost!!!
|
|
|
