coozer
|
| posted on 27/8/06 at 02:36 PM |
|
|
Zetec Exhaust
Anyone got any, or know where to get exhaust blanks pre cut for a zetec?
Any bespoke mainfolds or bits of headers to bolt up to the head?
ust want to knock something up to run the engine up without the car!
Cheers,
Steve
1972 V8 Jago
1980 Z750
|
|
|
|
|
Surrey Dave
|
| posted on 27/8/06 at 02:45 PM |
|
|
Here
http://cgi.ebay.co.uk/ZETEC-LASER-CUT-EXHAUST-MANIFOLD-PLATE-8MM_W0QQitemZ300019646639QQihZ020QQcategoryZ100921QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
|
|
|
coozer
|
| posted on 27/8/06 at 03:09 PM |
|
|
bit too dear, I'm skint!
Demon Tweaks have one for about £32.
Just want some cheap bits to get me by for now.
Thanks anyway
1972 V8 Jago
1980 Z750
|
|
|
roadboy
|
| posted on 27/8/06 at 04:30 PM |
|
|
There was a company at the Harrogate show selling laser cut flanges, I can't remember their name but will post it up if I can find their card
Cheers
Ian
Jude Performance Services
|
|
|
big_wasa
|
| posted on 27/8/06 at 04:58 PM |
|
|
I was going to use a standard manifold and a bit of flexi on to a mufler but never got round to it.
Standard manifolds go from a quid on the bay
|
|
|
coozer
|
| posted on 27/8/06 at 05:01 PM |
|
|
I've got a standard manifold but its cast iron, not one of the tubular jobs. Ah, now theres a fault... hacksaw and welder - sorted.
Nyone got a tubular exhaust manifold to fit a 1.8 zetec???
Thanks.
[Edited on 27/8/06 by coozer]
1972 V8 Jago
1980 Z750
|
|
|
Krismc
|
| posted on 27/8/06 at 07:12 PM |
|
|
...yea ive still got the cast manifold sittin on my drive since ... sumone last visited.
its still there i keep forgetting to throw it.
you got u2u
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
roadboy
|
| posted on 28/8/06 at 08:39 AM |
|
|
I am currently buying a Zetec blacktop from a Focus which still has the tubular manifold attached ( I think anyway).
When I get it I will give you a shout
Regds
Ian
Jude Performance Services
|
|
|
coozer
|
| posted on 28/8/06 at 06:35 PM |
|
|
quote:
Originally posted by roadboy
I am currently buying a Zetec blacktop from a Focus which still has the tubular manifold attached ( I think anyway).
When I get it I will give you a shout
Regds
Ian
Cheers marra..
1972 V8 Jago
1980 Z750
|
|
|
roadboy
|
| posted on 29/8/06 at 01:14 PM |
|
|
Hi Steve,
There's a laser cut exhaust flange on e bay with a £23 buy it now, may be worth a bid. Look under Zetec
HTH
Ian
Jude Performance Services
|
|
|
