iiyama
|
| posted on 9/11/06 at 11:18 AM |
|
|
Sierra Bearing housing/calliper mount
Sierra rear bearing housing/calliper mounting. Any one?
Yes I know I can get plates to bolt on to the drum versions to carry the callipers, but I want to keep the wieght down! 
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
|
|
NS Dev
|
| posted on 9/11/06 at 11:20 AM |
|
|
x1 or x2? Will have a look tonight, may have a bare one or two
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
iiyama
|
| posted on 9/11/06 at 09:26 PM |
|
|
will need both bud as I dont have any at the mo! Have the drum versions. If ya want Ill swap ya!
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
iiyama
|
| posted on 20/11/06 at 08:54 PM |
|
|
btt
|
|
|
iceman26
|
| posted on 20/11/06 at 09:58 PM |
|
|
if you have the bracket for converting drum to disc i have a set of bearing housing/calliper mounting if you want to swop
|
|
|
iiyama
|
| posted on 20/11/06 at 10:54 PM |
|
|
Dont at the moment, but Im looking to get hold of a pair. If you can hang on then Im up for a swap! 
Ian
|
|
|
iiyama
|
| posted on 27/11/06 at 10:53 PM |
|
|
Still looking!
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
