Deckman001
|
| posted on 11/11/06 at 02:29 PM |
|
|
X/flow alternator
Hi all, anyone out there got a spare alt for a crossflow ?? Or anyone local got 1 I can borrow to make sure it's me alt that's at fault,
not anything else ??
Cheers
Jason
[Edited on 11/11/06 by Deckman001]
|
|
|
|
|
trextr7monkey
|
| posted on 11/11/06 at 04:23 PM |
|
|
If you nip into your local branch of Lucas they will test your alternator for you and give you the low down on the state of it
http://www.flickr.com/photos/14016102@N00/ (cut and paste this dodgey link)
Our most recent pics are here:
http://s129.photobucket.com/albums/p211/trextr7monkey/
|
|
|
scutter
|
| posted on 12/11/06 at 07:19 AM |
|
|
I may have one Jason, any of the WLM going to Exeter, i could take it there or pop past if you across this way.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
stevetzoid
|
| posted on 12/11/06 at 10:27 AM |
|
|
Hi there, have you measured the output with a voltmeter with the engine running and then without the engine running this will show you if the
alternator is working. You should see a voltage increase.
Steve Evans.
|
|
|
rusty nuts
|
| posted on 12/11/06 at 10:51 AM |
|
|
Look for around 13.5v to 14.5v with engine running
|
|
|
scutter
|
| posted on 12/11/06 at 12:32 PM |
|
|
Jason, i've just checked i have a 18ACR if it's any good to you?
ATB Dan.
The less I worked, the more i liked it.
|
|
|
Deckman001
|
| posted on 12/11/06 at 02:57 PM |
|
|
Hi guys, I have measured with a meter, it don't change from running to stopped  it's just slightly less each time I've started
it
Nice idea about getting it tested, I'll have to have a look to see where the nearest place is.
Dan, I'll get back to you, when is Exeter?.
I was hoping to go, But if it's next week, the kids have just triple booked us all with water polo comps and rehersals at the Royal Albert Hall
Jason
[Edited on 12/11/06 by Deckman001]
|
|
|
Deckman001
|
| posted on 12/11/06 at 03:00 PM |
|
|
Does the back of it look anything like this Dan ??
Image deleted by owner
Jason
|
|
|
scutter
|
| posted on 12/11/06 at 03:20 PM |
|
|
Yes Jason, it's next weekend. The back looks similar execpt ths ones got a black plastic cover over it.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
Deckman001
|
| posted on 12/11/06 at 04:29 PM |
|
|
I guess as long as it's off a crossflow it should fit ? I'll canvas the wlm and see if anyone can pick it up for me, how many beer tokens
do I owe ya for it 
Jason
|
|
|
.jpg)
