Humbug
|
| posted on 25/11/06 at 08:38 PM |
|
|
Wanted: 4xM8 dome head allen bolts
As per the subject really. I have made some new cycle wing brackets to replace the crap 10mm tube+3mm flat bar ones that kept breaking - the new ones
are 1 1/8" (about 28mm) x 1/4" (6mm) flat bar.
The wings were previously "Wurth"ed to the brackets but I was able to pull them off the old brackets quite easily, so I want to use bolts
for the new ones. Anyone got 4 stainless dome head allen bolts M8 x about 20mm available in return for a couple of beer tokens? I've got nylocs
and washers, but the likes of Tifosi seem to only sell in 10s.
Cheers
|
|
|
|
|
Coose
|
| posted on 25/11/06 at 09:12 PM |
|
|
Try eSkip - here. 
Spin 'er off Well...
|
|
|
oliwb
|
| posted on 25/11/06 at 09:16 PM |
|
|
Don't bolt them on.....I used flat bar like you and then fibreglassed the wings on to it....they are absolutely solid not going anywhere!
There's no bolts coming through so no crazing etc etc.....Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
scutter
|
| posted on 25/11/06 at 09:41 PM |
|
|
Simon, U2U sent.
Dan.
The less I worked, the more i liked it.
|
|
|
bob
|
| posted on 26/11/06 at 12:00 AM |
|
|
I've deffinatly got some zinced M8 domes,i'll have a check in the garage tomorow re the stainless if dan cant help.
|
|
|
RazMan
|
| posted on 26/11/06 at 12:35 AM |
|
|
eBay Link
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
Humbug
|
| posted on 26/11/06 at 08:47 AM |
|
|
Thanks for the various replies and U2Us
|
|
|
pajsh
|
| posted on 26/11/06 at 09:20 AM |
|
|
I've got some about 40mm long and you can them have free if you U2U your address. A2 grade I think.
Unless you're already sorted.
Cheers.
I used to be apathetic but now I just don't care.
|
|
|
