oliwb
|
| posted on 17/12/06 at 03:30 PM |
|
|
Zetec flywheel
Had a look on ebay which has proved fruitless so hoping someone here can help me out. I'm looking for ideally a 1.6 or 1.8 Zetec flywheel or a
CVH one. Not sure which is lighter/easier to get clutches and alike for! If anyone can help me out it would be great. Thanks.....Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
|
|
bob
|
| posted on 17/12/06 at 04:12 PM |
|
|
donor spares link
Oli
I got mine from the above
|
|
|
oliwb
|
| posted on 17/12/06 at 04:46 PM |
|
|
I saw them advertising one on ebay but when I asked a question about it they didn't bother to reply...I wasn't very impressed so
didn't buy it from them! Prob gonna have to go with partfinder or someone if no one on here has one spare.....Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
TangoMan
|
| posted on 17/12/06 at 08:37 PM |
|
|
Oli,
I have a 2.0 flywheel going spare and a CVH FWD one. The 2.0 is heavy whereas the CVH one is very light. This would be ideal if you could find a 6inch
clutch plate to go wih it.
Retro Ford do a modified 1.8 flywheel to fit pinto clutch. Not cheap but readily available.
Summer's here!!!!
|
|
|
oliwb
|
| posted on 18/12/06 at 10:42 AM |
|
|
Cheers tangoman.....I'll hold on a bit and see if I can get a 1.6 or 1.8 Zetec one first but might take you up on the CVH one if
not.....Thanks...Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
