mistergrumpy
|
| posted on 3/4/07 at 09:10 PM |
|
|
Spacers
I'm after some spacers/bushes for the bottom pivot mount in my pedals I've made. Need them about 21mm outer diameter with about an M8 hole
in. Can anyone point me in the right direction? Steel, brass, ally dunno?
|
|
|
|
|
stevec
|
| posted on 3/4/07 at 09:41 PM |
|
|
The ones in my kit were nylon, perhaps you could turn some out of nylon bar,
Steve,
|
|
|
mistergrumpy
|
| posted on 3/4/07 at 09:59 PM |
|
|
Really? I thought that would be a wee bit too flexible. Hmm, sounds a bit easier to find (Ebay).
Cheers Steve
|
|
|
blakep82
|
| posted on 3/4/07 at 10:43 PM |
|
|
i think the old ron champion book mentions keeping the nylon bushes from the doner. I think most cars have nylon spacers anyway don't they?
never really looked down there...
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
