Danozeman
|
| posted on 30/4/07 at 07:36 AM |
|
|
Bike carb jets
Wheres the best cheapest place to get them from?? For zx9r carbs.
[Edited on 30/4/07 by Danozeman]
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
|
|
Surrey Dave
|
| posted on 30/4/07 at 08:43 AM |
|
|
Drills
Its cheaper to buy a selection of drills , if you need to go larger with the jets sizes.
I get mine from here :
www.drill-service.co.uk/
they go up in .005mm , i.e 1.4 ,1.45, 1.50, etc.
[Edited on 30/4/07 by Surrey Dave]
|
|
|
Danozeman
|
| posted on 30/4/07 at 11:04 AM |
|
|
I need small ones to start with. Mine are 170 i think.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Surrey Dave
|
| posted on 30/4/07 at 11:40 AM |
|
|
Surprised
What size are your carbs 36mm /38mm?
I'd be surprised if you needed less than 160/170.
Unless you have a restrictive air filter.
What about the needle ? , these carbs spend a lot of time running on the needle portion of the range.
|
|
|
Danozeman
|
| posted on 30/4/07 at 11:56 AM |
|
|
Theyr 38 i think. Set up by bogg bros. I have a sausage filter on it which makes hell of a difference to the running. I havent taken the bowels
off so not sure of the jet size, Just guessing.
[Edited on 30/4/07 by Danozeman]
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Surrey Dave
|
| posted on 30/4/07 at 12:31 PM |
|
|
here?
http://www.allensperformance.co.uk/
Can supply parts for mikuni etc.
Some people have used weber main jets , they can be bought much cheaper.
|
|
|
