nitram38
|
 posted on 6/6/07 at 03:01 PM |
|
|
Cap head bolts Wanted
160mm long and M10 1.25 pitch!
An alternative would be a longer M10 bolt that can have the shank re-threaded to 1.25 pitch.
It is for my R1 engine.
I would rather the correct bolt size than re-threading the engine block.
Cheers Martin
|
|
|
|
|
welderman
|
| posted on 6/6/07 at 03:08 PM |
|
|
how many
material. ie stainless or mild steel H/T
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
nitram38
|
| posted on 6/6/07 at 03:14 PM |
|
|
quote:
Originally posted by welderman
how many
material. ie stainless or mild steel H/T
I only need 2 and I would prefer stainless.
|
|
|
PeterW
|
| posted on 6/6/07 at 03:33 PM |
|
|
Martin
Ttry Fast Fix Direct - usually have that sort of thing
Do a google for them
Peter
|
|
|
nitram38
|
| posted on 6/6/07 at 03:41 PM |
|
|
Tried them.
I think that I am fcuked!
Max length is 100mm.
It looks like I might have to rethink my fixing points on the chassis.
|
|
|
pewe
|
| posted on 6/6/07 at 04:01 PM |
|
|
Try PFS in Arborfield 0118 932 8832 do all sorts of stainless and used to supply Xtrac, failing that AHC Camberley 01276 709069 are helpful. Good
luck, Pewe 
|
|
|
Aboardman
|
| posted on 6/6/07 at 04:04 PM |
|
|
http://www.a2stainless.co.uk/M10-x-1-25-x-115mm-Socket-Capscrew-A2_AEE5.aspx
115mm long is the longest i found
or 160 but as a bolt head
http://www.a2stainless.co.uk/M10-x-1-25-x-160mm-Hex-Bolt-A2-_A92P5.aspx
[Edited on 6/6/07 by Aboardman]
|
|
|
nitram38
|
| posted on 6/6/07 at 04:12 PM |
|
|
Pewe, thanks for the numbers. I rang both and they are going to try and locate some and will ring me back in the morning.
I am keeping my fingers crossed !
|
|
|
nitram38
|
| posted on 6/6/07 at 04:15 PM |
|
|
Aboardman
just seen your post. I can change to hex head, perfect thanks!
|
|
|
02GF74
|
| posted on 6/6/07 at 04:55 PM |
|
|
I'll try my local fastener although I wasn;t successful last time I offered this service!!
cap head in 160mm long and M10 1.25 pitch, fully threaded or else a set screw (fully threaded) in stainless.
is that ISO thread or some fine/coarse variant?
|
|
|
GazzaP
|
| posted on 6/6/07 at 05:36 PM |
|
|
try willenhall fastners they are very good and can get specials mad can't remember there number though!
www.gmpmotorsport.co.uk
|
|
|
iiyama
|
| posted on 6/6/07 at 07:36 PM |
|
|
Get some 160 M12's turned down to correct diameter, and then I can lend ya an M10 x 1.25
die.......
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
welderman
|
| posted on 6/6/07 at 09:13 PM |
|
|
i will know by morning, will let you know
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
