pathfinder
|
| posted on 13/10/07 at 06:25 PM |
|
|
Thin wall stainless tube
Does anyone know of anywhere that sells thin wall stainless tube. I fancy building a couple of bike silencers but rolling and welding sheet seems like
to much hassle.
100mm OD 0.8 wall would be nice
Thom
|
|
|
|
|
Simon
|
| posted on 13/10/07 at 07:10 PM |
|
|
Thom,
Millner Offroad should be able to supply you with everything you need. There are other co's that will be recommended shortly
ATB
Simon
|
|
|
Bigheppy
|
| posted on 13/10/07 at 07:25 PM |
|
|
You could have a look at the flue pipe used on oil boilers there is a polished stainless type. Can,t remember how much it costs or the outside
diameter. 
|
|
|
DanP
|
| posted on 13/10/07 at 08:05 PM |
|
|
Custom Chrome do 4inch tube for £22 a metre which is actually pretty cheap!
Hpe.co.uk are cheap for bends.
Cheers,
Dan
|
|
|
pathfinder
|
| posted on 14/10/07 at 03:18 PM |
|
|
Any other suggestions, I’m after thin wall 1mm or less!!!
|
|
|
welderman
|
| posted on 14/10/07 at 04:09 PM |
|
|
i can have a look, but im sure we used the last lot of bits up for our own silencers, will check tomorrow.
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
pathfinder
|
| posted on 14/10/07 at 08:42 PM |
|
|
that would be spot on, if you dont have any, can you remember where you got it from???
|
|
|
