j30fos
|
| posted on 6/11/07 at 10:24 PM |
|
|
VX to type 9 bellhouse
I know its a long shot but thought id ask anyway 
|
|
|
|
|
NS Dev
|
| posted on 6/11/07 at 10:28 PM |
|
|
its a long shot
sorry!
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
coozer
|
| posted on 6/11/07 at 10:39 PM |
|
|
Is a VX the same as an XE???
If so I've seen XE to type 9 housing's advertised.
Can't remember where, but as I only buy PPC and classicford it's one of them two
Psst... (Occasionally FastFord as well but don't tell anybody!)
1972 V8 Jago
1980 Z750
|
|
|
omega 24 v6
|
| posted on 6/11/07 at 10:49 PM |
|
|
You'll be lucky as the second hand ones on ebay make as much as the new ones. Around the £175 mark.
If it looks wrong it probably is wrong.
|
|
|
j30fos
|
| posted on 7/11/07 at 06:57 AM |
|
|
£175, wheres that from? Ive seen them but dearer than that.
|
|
|
fesycresy
|
| posted on 7/11/07 at 08:09 AM |
|
|
Yukspeed
About £140 !
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
fesycresy
|
| posted on 7/11/07 at 08:10 AM |
|
|
Sorry, they're £160.
Yukspeed
HTH
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
j30fos
|
| posted on 7/11/07 at 09:35 AM |
|
|
Great, cheaper than I thought.
|
|
|
omega 24 v6
|
| posted on 7/11/07 at 12:26 PM |
|
|
I got mine from A frame engineering for around £146 you'll need socket headed cap screws for it as well 12mm fine.
If it looks wrong it probably is wrong.
|
|
|
.jpg){kind=avatar}
