Paul TigerB6
|
| posted on 31/12/07 at 10:25 AM |
|
|
Wanted - Dizzy for Pinto non vac advance
Hi all
I am looking for a distributor to use on the Tiger Supercat i am building for a friend. Standard Pinto with twin Weber 45's so i need a non
vacuum advance dizzy.
Anyone gone over to megajolt and got one lying around that they want to swap for some beer tokens??
Cheers
Paul
|
|
|
|
|
matt_claydon
|
| posted on 31/12/07 at 11:48 AM |
|
|
I just used the standard one without the vac connected on my Pinto with 40s. Ran and idled fine and made good power.
|
|
|
Paul TigerB6
|
| posted on 31/12/07 at 12:15 PM |
|
|
I thought that the amount of advance would reduce power without the vacuum system operational. Would be interested to hear what others feel so will
open up a thread in the proper section but appreciate your comments.
|
|
|
HAL 1
|
| posted on 31/12/07 at 12:28 PM |
|
|
I've got one for electronic ecu, just three wires on, hope that describes it ok.
|
|
|
britishtrident
|
| posted on 31/12/07 at 03:28 PM |
|
|
Vac advance is essentially an ecomomy device it allows the use of weaker mixtures at idle and low throtle opennings.
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
|
Paul TigerB6
|
| posted on 31/12/07 at 04:17 PM |
|
|
Thanks for the replies gents. I'll run with the standard distributor then unless the owner's budget will stretch the extra £100 to
Megajolt.
|
|
|
