Jon Ison
|
| posted on 24/1/08 at 08:59 PM |
|
|
Throttle return spring
I have a hatful of springs suitable in length but all a bit on the strong side,
Anyone got one a bit on the softer side if you know what I mean ?
Around 4-6 inch long and a tad weak would be great. Ta.
|
|
|
|
|
worX
|
| posted on 24/1/08 at 09:47 PM |
|
|
I have a couple Jon.
Send me your address again and I'll post one to you asap
Steve
|
|
|
vindicator
|
| posted on 25/1/08 at 09:20 AM |
|
|
Same as the above post......look at an old folding chair, the canvas ones....on the back there are 3 springs.....I used one of them for my return
spring on the accelerator pedal. ....had the right curves at both ends to fit into place.....Local refuse tip should have hundreds of them.....
HTH
Regards
|
|
|
02GF74
|
| posted on 25/1/08 at 10:09 AM |
|
|
if you have spring of correct tension but too short, you can "lengthen" it by including a piece of thick wire.
|
|
|
