jimgiblett
|
| posted on 29/2/08 at 10:56 AM |
|
|
Wtd Sierra steering column & Wheel
Has anyone got a Sierra steering column and wheel that they would exchange for a few beer tokens. Just need for SVA but as I will be grinding off the
ignition switch etc a borrow might be out of the question.
Cheers
Jim
[Edited on 29/2/08 by jimgiblett]
|
|
|
|
|
CRAIGR
|
| posted on 29/2/08 at 02:35 PM |
|
|
Hi Jim
I,ve got an aftermarket collapseable sierra boss thats borrowable if needed.
Craig
|
|
|
jimgiblett
|
| posted on 29/2/08 at 04:12 PM |
|
|
Hi Craig
Thanks for the offer.
Unfortunately the problem I have is that the part built kit that I purchased has a quick release spiggot welded onto to the internal steering shaft.
With no thread I cannot attach a sierra s/wheel. As the Racetech wheel is not "Type approved" it is an SVA failure according to the
manual. I could possibly borrow a column but because I have a paddle shift I would need to grind of all the superfluous ally casting including the
switch gear mounts and ignition barrel.
Cheers
Jim
|
|
|
CRAIGR
|
| posted on 29/2/08 at 04:55 PM |
|
|
No worries Jim
Will visit local scrappy in morning and see what he's got.
|
|
|
jimgiblett
|
| posted on 3/3/08 at 12:45 PM |
|
|
Got one now.
And a Renault inertia cut off switch to cut the FI in case of a shunt.
- Jim
|
|
|
