scutter
|
| posted on 12/3/08 at 12:26 PM |
|
|
Threaded bar again
Gents, as i don't own a lathe, just ask Chris Russell
Does anyone know where i can get or get made some 1" steel round bar with a 1/2" unf hole tapped in it. They need to be 2" in
length for making rose jointed upper wishbone at the front.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
|
|
Mr Whippy
|
| posted on 12/3/08 at 12:31 PM |
|
|
Perfectly feasible to tap this by hand
Fame is when your old car is plastered all over the internet
|
|
|
r1_pete
|
| posted on 12/3/08 at 12:39 PM |
|
|
I've a lathe and the taps, so could make them for you if you can get the material to me.
|
|
|
pewe
|
| posted on 12/3/08 at 12:47 PM |
|
|
If you want off-the-shelf try Rally Design or Matt at CBS will probably oblige.
Cheers, Pewe 
|
|
|
