hector
|
| posted on 24/4/08 at 09:18 PM |
|
|
2L pinto manifold and carb wanted
evening all!
Would anyone out there have a 2.0 litre Pinto manifold and carburettor for sale?
|
|
|
|
|
mcerd1
|
| posted on 25/4/08 at 09:13 AM |
|
|
got one of a sierra
some kind of webber downdraft I think
its sat for a long time (on the engine, outside, but covered)
I can take it to stoneleigh if your interested
[Edited on 25/4/08 by mcerd1]
|
|
|
richwill
|
| posted on 25/4/08 at 11:19 AM |
|
|
pinto manifold and carb
i have a 38dgas and manifold i was going to fit but not needed now not sure what its worth make me an offer
|
|
|
DarrenW
|
| posted on 25/4/08 at 11:29 AM |
|
|
38 DGAS is a good carb when set up correctly. IIRC it was an optional power upgrade on RS2000's. More commonly fitted to V6's.
I had one before the bike carbs. Probs the best of the std ford carbs to use before you get into quad carb set ups. Passed SVA with mine as well.
|
|
|
hector
|
| posted on 25/4/08 at 04:51 PM |
|
|
Thanks for the replies guys
Richwell i also have no idea on value, i just need something for me next project- got me a p100 pick up with what looks like a carb from a lawnmower
on it!!
pse let me know how much you would like for the man/carb
cheers colin
|
|
|
mcerd1
|
| posted on 25/4/08 at 06:40 PM |
|
|
do the P100's have the low compression version of the pinto or is that just transits ??
|
|
|
hector
|
| posted on 26/4/08 at 05:37 PM |
|
|
I dont know! but it does have a 205 block if that helps!!
cheers colin
|
|
|
mcerd1
|
| posted on 28/4/08 at 07:44 AM |
|
|
someone correct me if I'm wrong - but I think they put low comp pistons in them
(I think its writen on the piston tops)
easy enough to swap for normal ones if your re-building it
|
|
|
hector
|
| posted on 28/4/08 at 08:52 PM |
|
|
Yes i will be replacing them as i have a set of v6 cologne ones to put init!!
should beef it up a wee bit.
|
|
|
