mads
|
| posted on 26/8/08 at 09:48 PM |
|
|
new parts for modification by MK
am after the parts needed by MK to modify before I pick up my kit... tried searching the net but to no avail. can someone point me to places that sell
items (new) on the list below?
- propshaft
- steering column
- steering U/J linkage
cheers,
mads
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
|
|
indykid
|
| posted on 26/8/08 at 10:03 PM |
|
|
they'll also need to modify a pair of sierra front uprights for you too so they'll take the maxi ball joint.
are you going BEC or CEC? if BEC, you're better off sourcing your own prop
for column, down link and steering rack, ebay is probably best or someone on here.
tom
EDIT : just re read and you want new stuff......? is this so you can have a new registration? most of the bits you're after would be altered so
radically, you could happily claim them to be new anyway.
[Edited on 26/8/08 by indykid]
|
|
|
mads
|
| posted on 26/8/08 at 10:17 PM |
|
|
hi indykid
yeah, it is so i have a new registration (and i know it is not going to be "locost"
i've got the uprights covered (RD) hence didnt list it.
am going with a BEC - what do you mean I am better off sourcing my own prop? As in having one built for me?
i could claim that they are new but then I would also need receipts proving that, wouldnt i?
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
02GF74
|
| posted on 27/8/08 at 08:40 AM |
|
|
CBS sell UJ and tube for steering column.
|
|
|
paulmw
|
| posted on 27/8/08 at 11:05 AM |
|
|
I got MK to supply them.
|
|
|
DarrenW
|
| posted on 27/8/08 at 11:28 AM |
|
|
For the 3 items you list no-one will know if they are new or not if you get paperwork to say they are.
for prop - if you want a new one there are loads of places that can make them. Dunning and Fairbank, IMS, Bailey Morris are probs the 3 better known
ones.
No idea where you will get a new steering column from and if you do find it id guess it wont be cheap.
B2 automotive make new intermediate shafts that can be modded to length - probs supply them to CBS.
|
|
|
mads
|
| posted on 29/8/08 at 03:55 PM |
|
|
is it possible to get a 2.4 quickrack for sierra? i can only seem to find a 2.8 on the net (inc RD) and MK say theirs is a 2.7
anyone shed any light?
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
