Jasper
|
| posted on 16/10/08 at 02:30 PM |
|
|
Stainless sheet???
I need a piece of sheet stainless, about 12-18 inch square, to make a heatshield for the turbo and manifold.
If you're not living life on the edge you're taking up too much room.
|
|
|
|
|
liam.mccaffrey
|
| posted on 16/10/08 at 03:00 PM |
|
|
i have some but can't get it to you until christmas when i come home from the states
I dance like your avatar
Build Blog
Build Photo Album
|
|
|
Jasper
|
| posted on 16/10/08 at 03:12 PM |
|
|
Hey Liam - thanks mate - hope it's all going well over there. Christmas will do unless there's any other offers, will be a while b4 SVA
anyway.
Yeah - I dance like that too after a few 
If you're not living life on the edge you're taking up too much room.
|
|
|
coozer
|
| posted on 16/10/08 at 05:33 PM |
|
|
Tried B&Q??
1972 V8 Jago
1980 Z750
|
|
|
Hugh_
|
| posted on 16/10/08 at 07:42 PM |
|
|
I've got a piece 15"x14"x3mm. Some holes drilled in corners where capri runners/cobra buckets were fitted. 15"x12.5"
of undrilled area. Free if collected (I'm in kent).
I cant receive U2U's so contact by email (hugh_gabriel@msn.com)
|
|
|
kj
|
| posted on 17/10/08 at 07:02 AM |
|
|
I have 3 sheets 500 x 500 x 3mm if they are any good you can have them.
|
|
|
Jasper
|
| posted on 17/10/08 at 09:26 AM |
|
|
Thanks KJ, I think 3mm will be a bit thick, I'll probably go with Hugh's 2mm sheet.
Thanks chaps 
If you're not living life on the edge you're taking up too much room.
|
|
|
Hugh_
|
| posted on 17/10/08 at 10:26 AM |
|
|
Mine is 3mm as well, think I put that in the original post.
|
|
|
