hobbsy
|
| posted on 17/12/11 at 07:24 PM |
|
|
WTD: R1 loom plug from stator to reg/rectifier
As per the subject.
I need the 3 pin grey connector which is about 2 inches wide and 1 inch deep. It goes from the stator windings (hard wired) on plugs on to the
regulator / rectifier.
It would be a major bonus if it had a decent length of wire left on it as well.
This is for the 2002/2003 5PW engine however I suspect the earlier 4XV / 5JJ may be the same. I'd guess the later 5VY is different though?
Thanks.
|
|
|
|
|
lsdweb
|
| posted on 18/12/11 at 10:47 AM |
|
|
Can you post a photo of the rectifier / regulator? I may have one.
Regards
Wyn
|
|
|
NigeEss
|
| posted on 18/12/11 at 11:51 AM |
|
|
Is it the plug from the stators or the plug into the loom you need ?
If it's the former I have one still attached to a dead stator.
Time is an illusion. Lunchtime doubly so.................Douglas Adams.
|
|
|
hobbsy
|
| posted on 18/12/11 at 04:05 PM |
|
|
Wyn - don't have a reg/rect photo to hand, and just to be clear its the plug and length of cable going to the stator I need.
Nige - as above it's the cable that is attached to the stator going to and including the grey 3 pin plug that attaches to the AC side of the
reg/rect that I need. If you have this on a dead stator then I'm interested (please leave as much cable as possible on it as my reg rect is a
fair distance away from the stator). U2U me with how much you want for it inc post?
Thanks guys.
|
|
|
matt_gsxr
|
| posted on 18/12/11 at 05:38 PM |
|
|
I think you may need these guys for your Furukawa connector.
The only problem is that they charge high postage from USA
http://easternbeaver.com/Main/Elec__Products/Connectors/R_R_Connectors/r_r_connectors.html
If you find the same cheaper then I'd be interested in hearing about the supplier as I need one similar but am too tight to pay massive postage.
|
|
|
matt_gsxr
|
| posted on 18/12/11 at 05:40 PM |
|
|
or (as I just did) search Furukawa on e-bay.
|
|
|
hobbsy
|
| posted on 18/12/11 at 08:58 PM |
|
|
Matt,
Which one's were you looking at on eBay when I narrowed it with fuku connector I only got 2 hits.
Didn't realise it was a connector common across different makes of bike. Useful to know.
|
|
|
NigeEss
|
| posted on 18/12/11 at 09:38 PM |
|
|
Hobbsy,
I don't want anything for it as it was for the bin anyway. Was just sitting in my scrap pile
waiting to be weighed in. I'll cut as close to the stator as I can.
UU me an address and I'll pop it in the post.
Time is an illusion. Lunchtime doubly so.................Douglas Adams.
|
|
|
