deanspoors
|
| posted on 23/1/17 at 08:54 AM |
|
|
Rim sections for 13" Image wheels
Just a thought, any rim sections out there inner/outer.
Cheers,
Dean
|
|
|
|
|
CNHSS1
|
| posted on 25/1/17 at 09:21 PM |
|
|
What sizes?
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
deanspoors
|
| posted on 26/1/17 at 12:14 AM |
|
|
Anything really. What have you got? I need some outer rims for one set of wheels and inner rims for another set I have.
Cheers,
Dean
|
|
|
CNHSS1
|
| posted on 26/1/17 at 12:17 AM |
|
|
Defo got some spares, will check dims Friday evening or Saturday
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
CNHSS1
|
| posted on 5/2/17 at 06:24 PM |
|
|
I have:-
7" inner x 2
6" outer x 3
3.5" outer x 2 both bent edges, will straighten but not pretty
1.125" outer x 2
1.5" outer x 2
4.5" inner x 1
Mix of revolution, Compomotive and force sections
Any use?
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
CNHSS1
|
| posted on 5/2/17 at 10:11 PM |
|
|
2 x 6"outers gone, dinged 3.5" outers and the the 1 x 4.5 inner, rest still available
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
deanspoors
|
| posted on 5/2/17 at 10:39 PM |
|
|
Hi, if the 7" inners are the same sizes as image, I would like them. Could you measure the PCD please and no. of bolts.
Thanks, Dean
|
|
|
CNHSS1
|
| posted on 6/2/17 at 03:33 PM |
|
|
Yep will do tonight. Defo 18 hole but can't remember bolt hole PCD or centre bore, will let you know later
Cheers craig
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
CNHSS1
|
| posted on 6/2/17 at 06:53 PM |
|
|
 
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
CNHSS1
|
| posted on 6/2/17 at 06:54 PM |
|
|
I'd say about 268mm hole centre to hole centre
And centre bore of 256? Mm
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
deanspoors
|
| posted on 6/2/17 at 09:59 PM |
|
|
Hi mate, had a measure up and I think they're going to be too tight towards the rear dampers mate unfortunately, the PCD does seem identical
though FYI.
|
|
|
