striker-4age
|
| posted on 16/4/17 at 10:20 PM |
|
|
Safety wire bolt and nut drilling jig wanted :)
Safety wire bolt and nut drilling jig wanted 
I need to drill a few bolts and nuts so I can safety wire them in place, anyone got one for sale ?
Thanks
[Edited on 16/4/17 by striker-4age]
|
|
|
|
|
ian locostzx9rc2
|
| posted on 17/4/17 at 05:44 AM |
|
|
A vice ?
|
|
|
liam.mccaffrey
|
| posted on 17/4/17 at 06:56 AM |
|
|
on Scamazon for £22
I wouldn't fancy doing nuts in a vice
https://www.amazon.co.uk/Motamec-Safety-Holder-METRIC-Thread/dp/B01IVLNVOQ/ref=sr_1_1?ie=UTF8&qid=1492412120&sr=8-1&keywords=safet
y+wire+jig
Build Blog
Build Photo Album
|
|
|
FuryRebuild
|
| posted on 17/4/17 at 07:09 AM |
|
|
Don't forget the
Pliers/twisters/cutters
When all you have is a hammer, everything around you is a nail.
www.furyrebuild.co.uk
|
|
|
steve m
|
| posted on 17/4/17 at 07:20 AM |
|
|
I used nylocks, much quicker and less hassle
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
FuryRebuild
|
| posted on 17/4/17 at 07:23 AM |
|
|
Me too, and I buy them by the 100 and only use once however there are occasions where they cant be used, and thread-lock isn't desirable. Then
there's the old-school cachet to have
When all you have is a hammer, everything around you is a nail.
www.furyrebuild.co.uk
|
|
|
ste
|
| posted on 18/4/17 at 12:57 AM |
|
|
have you thought about split pinning instead? castle nuts are cheap as chips and quicker than drilling them out in a jig
|
|
|
