APR
|
| posted on 20/1/20 at 09:14 PM |
|
|
MX5 7" ring and pinion 4.1 ratio
Anyone got a mx5 NB diff with the 4.1 ratio they want to move on ?
or just the ring and pinion ?
Thanks
[Edited on 20/1/20 by APR]
|
|
|
|
|
Paul_Arion
|
| posted on 22/1/20 at 10:00 AM |
|
|
I may well have a couple of these going spare - need to check the ratio but should be a 4.1:1. I am about to fit a 4.778 ratio from a Kia Sportage
into my sprint / hillclimb MX5. I'll have a look and let you know
|
|
|
APR
|
| posted on 22/1/20 at 02:25 PM |
|
|
Thanks Paul
|
|
|
Paul_Arion
|
| posted on 22/1/20 at 06:05 PM |
|
|
Hi
Just checked and yes I do indeed have a 4.1:1 ratio diff going spare here - its an open diff with 41 tooth crownwheel and 10 tooth pinion. All of the
NBs run the 7" diff which this is - but is from my very late mk1 so shouldn't make any difference. It was removed from the rear pumpkin a
month or so and has been stored in box the garage since. Nothing has been touched and all feels nice and smooth - I have another diff that will be
getting the 4.625 ratio this weekend that I have been dismantling
I also have another open diff complete with the rear pumpkin that was in my car for 100 miles or so - that should also be a 4.1 ratio but hasn't
been opened up at all. I can check that if required.
If these are of any interest then drop me a PM and I can sort some pictures if requried. I am near Wolverhampton but could arrange a courier via
DPD
cheers
Paul
[Edited on 22/1/20 by Paul_Arion]
|
|
|
APR
|
| posted on 22/1/20 at 07:09 PM |
|
|
sent you a u2u Paul
|
|
|
