mistergrumpy
|
| posted on 4/1/07 at 10:08 PM |
|
|
Serviceable Sierra Caliper Piston
Needed for a rear caliper it's about 43mm diameter and wind-in-able!
|
|
|
|
|
mackei23b
|
| posted on 5/1/07 at 08:26 AM |
|
|
I got new pistons for the front calipers from bigred, http://www.biggred.co.uk/ not expensive.
Cheers
Ian
|
|
|
smart51
|
| posted on 5/1/07 at 09:59 AM |
|
|
I have a pair of sierra rear calipers (piston half) that were fitted with new gaiters and piston seals a year ago. One of them leaks a bit through
the handbrake lever seal that I didn't replace. The castings are rusty but they are surplus to requirements if you are interested.
|
|
|
mistergrumpy
|
| posted on 5/1/07 at 06:06 PM |
|
|
Well I only need the one piston and big red will do it for £9 so I'll go with that I think as I don't need whole new calipers but thanks
all.
|
|
|
.jpg){kind=avatar}
