theconrodkid
|
| posted on 9/12/07 at 09:54 AM |
|
|
1.0 1.6mm ss welding rods
anyone got a couple of 1.0/1.6mm stainless arc welding rods going spare?
who cares who wins
pass the pork pies
|
|
|
|
|
muppet
|
| posted on 9/12/07 at 12:07 PM |
|
|
I,ve welded your sump now so will through a couple of rods in the bag.
Lost my password ... new pc doh
Regards Mark
|
|
|
SeaBass
|
| posted on 9/12/07 at 12:47 PM |
|
|
I wanted to weld a very small patch onto a stainless exhaust that had grounded. One weekend I was dragged around IKEA and bought a cheapo whisk (68p I
think) with stainless whisky bits. I cut these off and straightened them to use as rods. They worked perfectly despite being unknown Chinese
composition. The welds haven't even discoloured to this day.
|
|
|
theconrodkid
|
| posted on 9/12/07 at 01:47 PM |
|
|
cheers mark you are a gent
on the subject of exhausts,i have 2 pipes i need to join together tho not weld.
i have some ally tube,its only about 0.5mm wall thickness but a good fit as a sleeve,would this stand up to being fitted pre and post cat?
[Edited on 9/12/07 by theconrodkid]
who cares who wins
pass the pork pies
|
|
|
